612p
612p food slicer
The 612p food slicer has been designed for cutting all kinds of food (from very soft to hard sausages and cheese) into slices, thickness up to 28 mm, quickly and with precision. The slicer is manufactured to provide strict sanitary conditions. Handling is very simple and assures maximum safety. A unique sharpener provides high parameters of the cutting blade. The pusher fixed onto the table enables cutting food right till the end without off cuts. All food contact surfaces of the machine are made of stainless steel materials. Casts and aluminium protectors are anodized; the food carrier, blade guard, support plate, cutting blade and slice guide are made of stainless steel materials. The blade sharpener and the pusher are chromium plated. The 612p food slicer is made in two versions for two different applications.
- The machine in standard version is equipped with START-STOP buttons, for switching on and off the blade drive and automatic blade drive switching off after a short break in power voltage.
- The special version designed for slicing cheese (marked 612pT), blade, blade protector and the support plate are coated with Teflon, which protects from sticking cheese to the surface.
Switching the slicer on at the open or loose blade protector is impossible in both versions.
The 612p slicer should be cleaned from fat and food regularly after use. To do so, the slice thickness regulator knob should be set to „0” position and the feeding carriage should be moved towards the knob until a characteristic click is heard. Only in this position the feeding carriage can be removed after loosening the fastening knob. All elements to be cleaned; tray, blade protector, feeding carriage and slice guide can be dismantled without tools. The blade is protected with a safety cover for prevention from injury when the protector is open. The safety cover should not be unscrewed. Restarting the machine is possible upon fastening the feeding carriage and setting required slice thickness.
Blade sharpening:
(Fig.1) Sharpener in normal position. Saw gummer removed, blade edge open.
(Fig.2) Loosen the sharpener with the knob to lift it up automatically.
(Fig.3) Move the sharpener forward over the blade.
(Fig.4) When the saw gummer in placed over the blade, push the sharpener down and block with the knob. The slicer model is ready for blade sharpening in this position. Sharpening must be done with the engine switched on. For sharpening press the button of pusher for 5-10 seconds and then pull the sharpener puller handle for the same period. Sharp blade cuts paper easily (in the static position).
Technical data:
| Power of the motor: | 250 W | |
| Dimensions: | 635x500x495 mm | |
| Food carriage: | 300x250 mm | |
| Safety Class: | IP 33 | |
| Slice thickness: | 0-28 mm | |
| Blade: | 300 mm | |
| Weight: | 39 kgs |
